Author: Julie Endicott

Continue Reading

Reasons To Get A Sewer Camera Inspection Done

There are plenty of reasons why a plumbing company (or a plumber who works on his own) may want to invest in a video pipe inspection camera. A video pipe inspection is a simple way to do things for contracting plumbers. For the plumber’s sake, it’s when you have to work on a commercial or residential plumbing project. It can be a commercial or residential plumbing project, but either one, with a video camera, pushed through a pipe can be a lifesaver for the user at the other end. The reference to the video pipe camera or sewer camera is “sewer scope.”

It’s a simple sewer push camera inspection for a residential or commercial plumbing job, and when the mainline has a problem, the sewer camera will be able to see it because of the small dimensions of the scope. Besides, the main sanitation waste line needs someone or something to go in and inspect it throughout. The inside perspective of the pipes and all it’s “glory” will be seen through the “eyes of the camera” and recorded. The technician is allowed to see what is in the pipe and in “real-time” video. This can also be used for the customer’s future reference if there is any plumbing work that needs to be looked at years later. If more work needs to be done, then those who have to work in the same area can look back at the video pipe inspection, or a sewer camera inspection, and determine what work had been done to the pipes.

What other reasons would a property or homeowner want the sewer pipes inspected other than buying it?

1. Sewer problems –

Besides it being smelly, independent contractors such as plumbers can get a video pipe inspection, or a sewer camera inspection, done more effectively than a plumber without one. For one, getting into these pipes and tearing up yards of pipes when they don’t have to can get downright messy and smelly altogether. For the sewer camera inspection methods, it’s a way to work smarter, not harder. The sewer camera inspection technique is ideal for those plumbers who work for themselves. In fact, working without a video camera for pipe inspections can be more strenuous and more difficult. The work can be difficult because of “getting to the core problem” for an accurate diagnostic.

With maintaining a good flowing line, debris may have to be cleared away. This can be a simple task for the plumbers without having to replace too many pipes. For instance, there may be too much debris and roots around the pipes, and this can break or puncture them. With the video inspection camera, it can save the owners of the property thousands of dollars. Therefore, keeping the line in good lateral form is what the goal is to prevent excessive debris around the pipes, or even in them. A timely maintenance job is needed by the plumbers inspecting it. The root infiltration is also known to plumbers as (FOG) or fats, oil, and grease which can clog up pipes and be the main problem. This can be just one spot that is the problem. With the video camera inspection, all problems can be fixed.

On the other hand, there could be an entire sewer main line which may need replacing. The “presence of roots” can be an excuse by some companies for this full pipe replacement though. Not all companies are the same. If this is true, then every property may need replacing of their sewer lines. Technicians are trained to sale this procedure but with the video camera inspection cameras, it in real time, and customers see it for themselves. Customers can see what the technicians see, and this gives them their loyal services.

All in all, there are more companies which are using cameras to get those “opinions” of what needs to be done. With about 80% of the findings, they’re different from the first opinion such as the “blurry video” that was originally shown. The best sound advice from the pros is that the hiring a reputable company or a professional plumber who will NOT benefit from a bad plumbing diagnostic but one who is working to help you! In other words, the additional revenue from a plumbing job shouldn’t be exaggerated without proven video from live recordings which are generated from video camera inspections. Finding the honest and experienced company for consumers who need that “unbiased expert advice” can be solved with this reason to get a video pipe inspection.

2. A Notice from The City –

This is another reason to get a video pipe inspection. In fact, when you property homeowners receive a city notice regarding their connection to the city’s main sewage line, it’s a cause for concern. Normally, they’ll give you 45 days to have this diagnosed and repaired. The sewage can be released into the soil. This becomes an environmental hazard. The cities mainline may get damaged as the sewage moves the soil. The city ordinances in your county will not take this in stride. Because of aging sewage systems that age as time goes on, the municipalities must check their system’s lines with these CCTV cameras. In other words, they’ll be “eyeballing” your connections as well to make sure everything looks fine.

When property owners are served a city notice, we recommend having a video sewer inspection. These are some things that can be completed for you by this type of work.

– Verify that it’s your property line, not your next door neighbor.
– The conditions of older pipes plus the conditions of the sewer systems can be inspected with a sewer push camera.
– Damaged and clogged-up pipes can be checked in various (or specific) areas with a sewer camera.
– Find out exactly the location and depth of the problem that will be repaired. In fact, flags can mark the spot.
– This can help obtain a bid from more than one licensed plumber who has a good reputation for plumbing contracts.
– The exact areas of the clogs can be cleared with a sewer push camera.
– The damages to pipes can be fixed or replaced with a sewer inspection camera.
– The types of pipes can be determined with a sewer push camera.
– Before there is further damage or clogging up in sewer pipes, it can be analyzed with a sewer camera inspection.

What part of the sewage is your responsibility as a property owner?

Property owners, such as home and business property owners, are responsible for their sewers lines all the way up to their connection to the main city line. This means that they need to have their portion in-tact. The part of the line that’s under the city street, the city sidewalk, the landscape, and the nearby easements, are all where it’s more expensive to repair. It’s also where the sewer lines are deepest too. In fact, it’s where the connections to the city mainlines are connected evidently to the homeowners’ sewer pipelines.

3. New home warranty is about to expire –

Before purchasing a home, it’s good to have an inspector get a video pipe inspection. The main sewer line is recommended to be inspected. When one of our Parker, Colorado clients had a new home built, the subject was an important factor in getting such video inspection looked at. What makes this a truly important element in purchasing a home is when soils shift around and underneath homes. New lines can break because of the shifting soil. This can cause plenty of headaches and when purchasing a new home, and before the expiration of home’s warranty, getting a video pipe inspection is a wise thing to do.

How Video Inspections work

With the tool, inserting pipes which stretch laterally, and meters upon meters underneath the ground will be that much easier to view. Otherwise, it can be a nightmare for plumbers or contractors who have to get to the lines underground. Plumbers have a tough job. More can be done with a digital camera and more effectively with a video camera on a rod being pushed into pipes. This is the effective way to provide a plumber or user to stretch the tool down a pipe to inspect problem areas of sewer pipes.

Nevertheless, it is the visuals which the plumbers are after. As a result of the camera being on the end of a “stick or a rod,” the screen will be in real time and can record the inner lining of a pipe. It’s a tough job, but with the help of advanced technology such as real-time video, work can get done faster. The plumbing camera is attached to a screen for real-time visualization which is all recorded. The clogs and the damages of various types of pipes and sewer systems can easily be inspected with the plumber’s cameras. It makes it so much easier for those who have to inspect and fix problem areas of residential and commercial pipes.

Video from The Drain Camera Shop website displaying a high-quality sewer camera.

4. Before selling a home –

Home owners should have their sewage pipelines inspected before selling their home on the housing market. First of all, the consultation of a real estate agent or agency should schedule this “pre-listing” video pipe inspection of the sewer pipes before a sell or go on the market.

– It can help save any cancellations during the preliminary period sale of the home. Find the time to prevent any aggravation later.
– Identify and determine sewage line problems and the severity of them, if need be.
– If there’s an issue in your pipelines, then you’ll need this inspection immediately. The longer it takes to fix the problem, the more costly it can be.
– If you do not want to deal with the expenses, then let the buyer know immediately.
– Do not negotiate to get the buyer to pay for the problem. It can reduce the cost of your home’s value.
– Do not have any surprises during the negotiation process.
– Reduce the chances of your home’s selling potential from it not falling through because of sewage line problems.
– To get the customers you want, you must treat your home’s sale like a business deal.

Problems solved with video inspection camera

Finally, when purchasing property or a home, schedule a video pipe inspection to see any possible problems. With video inspecting of sewage systems, the pipelines under houses and commercial buildings are long and can be very difficult to determine where and how they are damaged. With a video camera inspection, it makes it easier for plumbers to see the problem quicker.

The digital cameras, when used for specific areas, is the way of a more effective way to determine how to fix plumbing and sewage problems. In other words, using the Sewer Push Camera Inspection Systems at The Drain Camera Shop provides a quicker and smarter way to get to the core of the problems. In fact, various companies supply them today because of their growing popularity.

Continue Reading

Reasons Why Generator Docking Stations Are Important

Generator docking stations are essential where there is electric power generation. The load bank is a device that applies an electrical load to serve as power source then it dissipates the resulting power. It is an essential tool in the power industry. Power generation is done from different resources such as generators, transformers, and power accessories among others.

The reason why a load bank is a valuable tool is due to its ability to apply an electric load to a power source and then converts the resulting power output. The load bank is used with engine generator, battery systems, inverters, ground power units, auxiliary power units and UPS systems.

There are different types of load banks used by technicians and companies; this depends on the specific use it is intended to play. Bank load types are resistive, capacitative and reactive. Example technicians will apply load bank in an engine generator; it mimics the load of the facility the generator is protecting. The generator docking station will then use a discrete electrical load to the generator this will measure the response stability of all products at various mechanical loads.

Therefore, any problem that can occur to the generator is identifiable and corrected as the environment is non-critical. Other uses include;
Guarantees available standby generator; most facilities have an alternative source of power to the nature of to minimize the losses that may occur should electric utility fail. Load banks guarantee the equipment in a situation of loss of its primary utility service; it acts as a simulation of the utility failure.

It reduces anxiety.

Load banks give you a higher degree of confidence when unexpected events occur in your facility. Load bank tests are a confirmation of the performance of the power source. When the test is positive, it gives confidence in the performance of the equipment being supplied with power.

Facilitates full load operation.

Load banks are used to diagnose any faults in power sources to ensure that they are working correctly. To ensure that works go on uninterrupted it is essential to test the power source example, generator power is very reliable but can be unpredictable, this will ensure that the system is capable of operating events that require the full load. The ability for equipment to perform without breakdown due to power issues gives high-performance measure and impact.

Assess maintenance.

Generator docking stations give a lot of information about the of a power system during full or partial load. Properly maintained equipment would work efficiently without breaking down. The confirmation will give confidence to the owner in its operation. Adequately maintained machines will reduce the cost of maintenance, improves its efficiency and lifespan.

Charges starting batteries.

Load banks are capable of initiating engine start; it ascertains the condition of the battery and battery sets this will indicate if individual cells are not holding the charge or about to fail. Being unable to charge is the failure to many generators, and if this is unidentified, it will be a loss of time during the operation.

Set up of the system to produce results; load bank testing ensures the generator working system is not compromised to avoid failure. No-load generator operation over a prolonged period may cause wet stacking. Wet stacking occurs because the generator is operating at light loads and low temperatures. Impacts of engine performance can be detected after a long time if generator docking stations are unused. Hence, its use proves and ensures the performance of each component of the generator such as governor system, cooling system, voltage regulator and exciter systems.

Test the performance of ATS.

Automatic transfer switch test is required to transfer building loads to the generator this is a sure method that the emergency power system is reliable at all time.

Attaining proper operating temperature; Bank load test produces artificial loads that produce this brings the engine to appropriate operating temperature. By exercising the generator, it will reach the proper operating temperature by doing so it will burn any residue in a contaminated fuel. The exercise prevents wet stacking.

Emission control verification.

Load bank generator testing aids to evaporate harmful deposits from the exhaust and engine system. When testing a generator the machine is allowed to operate at full power and temperature this will help to avoid wet stacking and the carbon deposits cleaned up.

From above, a generator docking station plays significant roles through testing which comes will multiple benefits. Depending on the facility that one may want to install load bank it is advisable to consult Fox Fab Power Solutions or the original generator manufacturer. Generator docking stations can be portable, permanent or radiator mounted. They all perform specific tasks and are available at different prices or hired.

Post courtesy of: Electrical Tap Box | Generator Docking Station & Connection Cabinet | Fox Fab – Serving Canada & United States. Check them out now for all your generator docking station needs!

Continue Reading

Discover how to save on heating costs

Staying cozy can be really tough if you live in a drafty house or poorly insulated apartment. But don’t worry, there are lots of ways to fix your place without a lot of time or money!

Step 1: Identify your heat source. Homes are equipped for gas heat, central air, electric baseboard heat, wood stoves.

If you don’t know which kind you have, you can ask your landlord, or do some detective work yourself. If you’re stumped, some kinds of heat, like gas heat, need to be turned on by the utility company. A general rule, though, is that most heat sources work better if you keep them at a fairly even temperature most of the time. If you keep the house cold and then crank up the heat by 20 degrees when you come home after work, you’re only going to make your heating system work harder and crank up your utility bill. It might be a good idea to check your rental agreement, if you have one, to see if your landlord requires you to keep your house at a certain temperature; some rental agreements might ask you to keep the thermostat set to at least 55ºF to prevent pipes from freezing.

I don’t know if you would want to have your house colder than that, though, seems a little cold… But also it’s good to not have frozen pipes. That happened to me one time. It was bad…

Step 2: Hit the hardware store! This is the best place to find weatherproofing materials, and most of them don’t require special tools or equipment. If you’ve got a drafty place: plastic sheeting. It’s all—it’s cheap, easy, and crucial. You can also look for rubber seals to press into the doors and windowsills to seal cracks, as well as power outlet covers to prevent drafts.

It also doesn’t hurt to grab an indoor thermometer so you can keep an eye on the temperature in your house. Almost all of this stuff will be in the same aisle of the hardware store. And it’s a little bit more pricey, but you might want to look out for a radiant space heater. Decent-quality space heaters run $50-$100 and can help heat smaller spaces so you don’t have to crank up the heat over the whole house.

Step 3: Be strategic with your heat. Identify which rooms you spend the most time in and which rooms you just need to stay warm enough so that the pipes don’t freeze. This is where that radiant space heater can come in handy. Keeping one in the bedroom and shutting the door ensures that the heater can warm up the small space enough for you to be comfortable.

Be safe with that heater, though, follow the instructions, do not burn your house down.

Step 4: Your mom was right: It’s cheaper if you just put on a sweater. So bundle up! Hit the thrift store for sweaters, scarves, fingerless gloves and blankets. Layer leggings, long-sleeve shirts and thick socks under your PJs to keep you nice and toasty. And having a nice big fluffy robe to put on when you get out of the shower—always super nice.

If you have long hair, try wrapping it up with a towel or big hair clip after you shower so you don’t have wet hair making you feel colder.

Step 5: Try to bring things in that will enhance your sense of coziness and warmth. Light some candles. Try turning on a couple soft-lighting table lamps in each room to make your home glow a little bit. Convince yourself it’s warm by putting on the Netflix “Yule log” video. Drink your favorite heated beverage, like tea, or hot chocolate to make your insides warm. The Danish concept of “hygge” (sorry for the pronunciation) might also be useful to research—the Danes have a ton of coping mechanisms for getting through a long winter.

Big thanks to Reliance Home Comfort who’ve used our services countless times:

Reliance Holmes Heating and Cooling Ottawa
5-1051 Baxter Rd, Ottawa, ON K2C 3P1
(613) 909-7460
http://www.holmesheating.com

Continue Reading

Do you need professional emergency plumbing services?

When last did you have your plumbing system checked over by a professional plumber? Do you want to avoid a costly plumbing emergency? Do you even know the different parts that make up your plumbing system?

Your backflow preventer: That is if you have a backflow preventer, some older homes do not and this can be a danger to your health because if contaminated back flow gets back into the piping system then it can allow bacteria to multiply and get into your drinking and bathing water. This is definitely something you want to avoid so if you don’t know if you have a backflow preventer you should find out. If you do have a backflow preventer keep in mind that the non-return valve can become worn and damaged over time from everyday use, you should have a professional plumber check it for you on a regular basis.

Your water heater: If you are using an old tank style water heater then you are wasting money, end of story. The sooner you change your system the sooner you will start saving money after the initial investment. You can opt for a solar water heater but be sure to get one with an electric switchover so you aren’t left with no hot water on an overcast day. The better option in my opinion is the new tankless system which heats water as it flows through the pipe only when the hot water faucet is on with the use of a heating element or gas flame, this provides practically limitless hot water to your home which is a great utility to have.

Your piping system and leaks: If you have an old iron piping system then chances are you will need to get your home repiped to the new copper standard in order to prevent potential rust poisoning. If you are on the newer copper pipes you will still have to maintain them in order to prevent leaks from springing up, leaks can be very problematic because if you don’t know where the leak is it could cause hundreds of dollars of damage before you even notice it. This is why it is good to have a plumber check over your pipes regularly as preventative maintenance

Your drains: Keeping your drains clean and block free is your responsibility and will come back to haunt you if you don’t do it often enough, sometimes a buildup of hair or residue can cause a blockage to build up inside the pipe unnoticed until the flow of water starts becoming restricted. At this point you should immediately apply some powerful commercial drain cleaner. If this doesn’t clear the blockage then call your local professional plumber to use a snake or hydrojet on the drain to clear the blockage.

 

Continue Reading

How to clean a blocked drain

If you have ever had a blocked drain, then you know exactly how much of a nuisance it can be. At first, you will notice the foul odour emanating from the accumulated muck that is stuck in there. Then, before you know it, nothing will be draining away at all, and you will be left with a real mess on your hands. To help you prevent this nightmare scenario from becoming a reality, we have compiled a list of tips to help deal with blocked drains.

  1. If the odour from the blocked drain is overpowering you then you should try pouring a healthy amount of lemon juice down the drain. Within an hour, the lemon juice should have neutralised the odour of the pipe, providing you with enough fresh air to get on with the job of unblocking.
  2. The first unblocking method to try is to boil a kettle of water and pour it slowly down the drain. Hopefully, the heat of the boiling water should be enough to melt or dissolve whatever is causing the blockage, and then the water should flush through the pipes, leaving your drain freshly unblocked. You could try adding a cup of Arm and Hammer baking soda to the hot water for an even more efficient clean.
  3. For the nastiest blockages, try pouring a ½ cup of baking soda mixed with a ½ cup of Salt down the drain, then pour the hot water down 20 minutes later.
  4. If hot water doesn’t work, then maybe Baking Soda and Vinegar will help. Pour 1/3 of a cup of Baking Soda mixed with vinegar down the drain, and the force of the reaction should contribute to clear the grime which has built up in the pipe.
  5. Perhaps you’ll need to use a plunger. Fill the sink with water to help create a seal around the plunger when you use it on the drain. Plunge several times in rapid succession, and hopefully, the sink should begin to drain as whatever caused the blockage starts to dislodge.

Find the U-shaped pipe in your drain system

You could try some very simple plumbing if the other techniques haven’t worked. Find the U-shaped pipe in your drain system and place a bucket underneath it to catch whatever comes out. Loosen the slip nuts at both ends of the pipe and slowly work the piece of pipe free. Drain the contents of the pipe into the bucket and then rinse it thoroughly with water. Put the pipe back together, and hopefully, your drain should now be performing as expected.

Bath drain clog

If it’s a bath drain which has become clogged, then try pouring 1/3 of a cup of Baking soda and vinegar down the drain and leaving it for 1 hour. After the hour put the stopper on the drain and fill the tub. When you remove the stopper, the force of the water from the tub should be enough to clear out the dirt which has already been loosened by the baking soda and vinegar.

Biological drain cleaners

Finally, there are some handy biological drain cleaners available in stores. If you buy one of these, then you should periodically pour some down your drain, and leave it there overnight. If you follow these instructions, then you should never have a problem from your drain ever again.

So, hopefully, now you should be well armed with advice for dealing with blocked drains. Just remember to try these tips, and if you should ever again be hassled by a blocked drain, then you should know exactly what to do.

Continue Reading